|
|
|
| Black & Decker Electric Knife |
|
7" (18 cm) Stainless steel blade Non-slip tabs for easy blade removal Safety lock prevents accidental start Comfortable handle with non-slip grip Serving fork included, Weight: 2.88 lbs., Manufacturer: Black & Decker
|
|
$16.00 - $22.00
from 2 stores
|
|
| K&S& Needle Files (430) |
|
Includes: round, 1/2 round, oval, flat with point, round - rough, square, flat with bevel, V-shape, triangle and flat with square point Tempered steel Also includes storage case Fine jeweler files For use with "K&S" metal shapes Tempered steel
|
|
$9.00 - $11.00
from 2 stores
|
|
| Hitachi CJ110MV D Handle Jigsaw |
|
Brand New Hitachi Jigsaw Full-Load Current 5.8 Amps Stroke Speed (SPM) 850-3,000 Max Cutting Capacity: Wood 4-5/16" Max Cutting Capacity: Metal 3/8" Stroke Length 1" Tool-Less Blade Change 4-stage Orbital Cutting Bevels 45 left & right
|
|
$15.00 - $116.00
from 4 stores
|
|
| Winchester& Multi Tool (22 41473) |
|
12 functions Includes: pliers, wire cutter, awl, file, ruler, can opener, bottle opener, serrated knife blade, fine edge knife blade, large and small flathead screwdriver, and crosspoint screwdriver Includes 10 piece bit set and carrying case
|
|
$14.00 - $16.00
from 2 stores
|
|
| Winframe Multi Pliers, Nylon Sheath |
|
Open Frame Design Multi-Tool includes Spring-Action Needlenose Pliers, Wire Cutter, 2 Knives Blades, Saw, File, Phillips Screwdriver, Screwdriver, Bottle/Can Opener, Tool Kit and Nylon Sheath, Weight: 0.75 lbs., Manufacturer: Winchester
|
|
$12.00 - $24.00
from 1 store
|
|
| K D 2228 Metric External Thread Restore File |
|
Brand New K-D Restore File Top mechanics quality Fully guaranteed Restores external threads by filing. Files both left- & right- hand threads. Long-lasting, fast-cutting teeth. Pitch Sizes: .075mm, 1.00mm, 1.25mm, 1.50mm, 1.75mm, 2.00mm, 2.50mm & 3.00mm
|
|
$10.00 - $12.00
from 2 stores
|
|
| General Tools T Repair File |
|
Thread Repair File, Restores Damaged Threads On Bolts, Screws, Pipes & Fittings, Varying Thread Pitch; 9, 10, 12, 16, 20, 27, 28, 32, T.S.P.
|
|
$8.00 - $14.00
from 2 stores
|
|
| Cooper Tire & Rubber 8" 4 In Hand File |
|
Nicholson, 8" 4-In-Hand File, Half-Round Shape, American Pattern, Has File Section & Rasp Section On Both Flat Side & Half-Round Side, For The Homeowner, Home Craftsman, Boat Builder & Mechanic, Carded.
|
|
$7.11 - $10.99
from 2 stores
|
|
| Cutler Hammer Fusible Ac Disconnect Switch 30 Amp |
|
Single phase, 2 pole, 2 wire, 240 Volts AC, non-metallic enclosure. Rated 1-1/2 HP at 120 Volts, 3 HP at 240 Volts with time delay fuses (uses Class H cartridge fuses, not included). For top and bottom entry and exit, with provision for Type H conduit hub. Heavy duty, high strength, rugged polymer e ...
More
|
|
$16.00 - $17.00
from 2 stores
|
|
| T130RF3 - Bosch Bits/Blades Tool Attachments |
|
3" with 30 Grit T-shank Jig Saw Blades—Specialty (5 packs of 3 pieces) 0.31" Height by 0.03" Thick 2.09" Working Length Special for Ceramics Coated Tooth Design Ceramics, glass, fiberglass 3/64" - 5/8" File effect for fine straight or curved cuts All Specialty Blades were designed with specific task ...
More
|
|
$14.00 - $18.00
from 2 stores
|
|
| Bosch 7 - 1/4" Skilsaw Circular Saw |
|
Max. 2.3 HP motor. Arbor size: 5/8" round; blade dia. 7-1/4". Depth of cut: max. cut at 45 degree, at 90 degree. No load RPM 4600/min.. Rating 12A, 120V. 6 ft. cord. Includes 20-tooth steel blade & blade wrench. Weight: 11.8 lbs..
|
|
$8.00 - $55.00
from 2 stores
|
|
| Cooper Group 21694 Mill Bastard Files with Handles |
|
With handle Used for sharpening mill or circular saws, and for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges, 2 square edges 8" long, tapers slightly in width, Weight: 0.38 lbs., Manufacturer: Cooper Group
|
|
$5.02 - $10.99
from 2 stores
|
|
| Stanley Surform Flat File |
|
This Surform Flat File is 17-3/8" long and 1-5/8"(41mm) wide Superb tool for use as a rasp on wood, plastic, soft metals and many other materials Manufactured with a metallic grey, die-cast alloy body Handle made of high impact polymer Fitted with a replaceable (10"/250mm) blade Stanley Model #21-29 ...
More
|
|
$12.00 - $15.00
from 2 stores
|
|
